The DHD340A drill bit is an industrial 4-inch Down-The-Hole (DTH) hammer button bit designed for heavy-duty rock drilling in mining, quarrying, water well drilling, and construction. Engineered with tungsten carbide buttons and a splined drive shank, it pairs directly with DHD340A or COP44 series DTH pneumatic hammers to pulverize rock formations.


| SHANK | DHD340A |
| Diameter | 115mm |
| Gauge Buttons: | 7*16mm |
| Front Buttons | 7*14mm |
| Carbide Design | Dome/Semi-Ballistic |
| Face Design | Convex |
| Flush Holes | 2 on front |
| Weight | 8.4kg |


Key Technical Specifications
- Shank Compatibility. Matches DHD340A (4-inch class) pneumatic DTH hammers.
- Standard Bit Diameters. Typically ranges from 110 mm to 127 mm (approx. 4-3/8″ to 5″), with 115 mm being the most common industry standard.
- Cutting Material. Fitted with heat-treated alloy steel bodies and tungsten carbide buttons (available in ballistic, semi-ballistic, or spherical shapes depending on rock hardness).
- Foot Valve Options. Available both with a foot valve (nylon/plastic tube to prevent debris backflow) and without a foot valve (tubeless design for newer valveless hammer systems).
Face Designs & Applications
Manufacturers such as Drilling Supply Store and Permon categorize DHD340A bits into three primary face profiles based on geological conditions:
- Flat Face. Offers superior stability and durability in fractured, fissured, or changing rock formations
- Convex Face. Features a domed center for high penetration rates and extended service life in hard, abrasive rock formations.
- Concave Face. Uses an inverted pilot design to improve hole straightness and alignment during deep-hole drilling





