RE120 reverse circulation hammer (RC DTH hammer) is a heavy-duty pneumatic downhole hammer engineered for mineral exploration, in-pit grade control, geological sampling and deep rock drilling. It adopts dual-tube reverse circulation structure, delivering continuous, uncontaminated geological cuttings samples through the inner sampling tube. Optimized piston & air distribution design brings 20% higher impact energy and 15% better energy efficiency versus older RC hammer models, with lower air consumption and faster penetration rate in hard rock formations


Suitable for dry exploration holes and wet borehole conditions. High back-pressure variant is available for water-rich ground. It can achieve over 200 meters per shift in competent hard rock, widely adopted in Australian mining, Africa mineral exploration and global grade control projects.
| Model | RE120 Reverse Circulation DTH Hammer |
| Hammer OD | 117.5 mm (4‑5/8″) |
| Bit Hole Range | 127 mm – 140 mm (5″ ~ 5½”) |
| Working Pressure | 1.5 – 3.45 MPa (15 ~ 34.5 bar) |
| Connection Thread | Remet 4″ / Metzke 4″ |
| Recommended Rotation Speed | 25 – 40 rpm |
| Air Consumption | 16 m³/min @1.7 MPa; 22 m³/min @2.4 MPa; 28 m³/min @3.0 MPa |
| Application | Mineral exploration, ore grade control, geological investigation |

Key Features
- Superior Impact Performance: 20% increased impact energy; stable operation under back pressure up to 34.5 bar, 20% improved back-pressure resistance for deep-hole drilling. Optimized air circuit reduces air demand and compressor fuel cost.
- High-Quality Uncontaminated Sampling: Integrated inner sampling tube conveys cuttings directly to surface, no cross-contamination of geological samples. One-piece inductively hardened sampling tube for extended service life.
- Easy Maintenance Design: Sampling tube can be inserted/replaced from the top without full hammer disassembly, minimizing site downtime. 12-spline bit shank and drive adapter with advanced heat treatment for high torque and wear resistance.
- Strong Compatibility: Matches 127–140 mm (5″ ~ 5½”) RC button bits. Interchangeable with standard Remet / Metzke RC drill string threads. Optional carbide / diamond enhanced RC bits for highly abrasive rock formations.
- Robust Construction :All critical components adopt premium alloy steel, precision machining and heat treatment. Stable impact frequency, less failure in fractured, hard and abrasive strata.
Package & Supply
- Packing: Plywood export case
- MOQ: 1 piece
- Supporting accessories: RE120 RC button bits, RC drill rods, inner sample tubes, spare piston, wear parts
Why Choose Our RE120 RC Hammer
- Proven field performance in Australian mining projects. Lower cost per meter drilled, reliable continuous sampling, easy on-site service. Full spare parts support and technical drilling guidance available. OEM & custom service acceptable.



