Reverse Circulation (RC) Drilling Tools are specialized drilling equipment widely used in mineral exploration, mining, geological sampling, and grade control drilling. RC drilling is designed to collect high-quality rock samples from underground formations while minimizing sample contamination.
Unlike conventional drilling methods, RC drilling uses a dual-wall drill pipe system to transport rock cuttings upward through the inner tube, providing efficient and relatively uncontaminated sample recovery.

Reverse Circulation (RC) drilling tools adopt dual-wall drill string structure. Compressed air flows down through the annulus between inner and outer pipe, actuating the RC hammer. Rock cuttings are carried upward through the inner tube to the surface, without mixing with formation debris. The complete RC DTH assembly mainly includes RC DTH hammer, RC bit, dual-wall drill rods, crossover subs, sample collector and auxiliary parts.

1. RC DTH Hammer (Core Power Unit )
It is the percussive power component specially designed for reverse circulation sampling drilling. Built with dual-channel internal structure. Compressed air passes through the annulus of dual-wall rod into the hammer to drive piston reciprocation and generate impact force. The air and crushed rock cuttings are guided into the central inner passage of hammer and then delivered upward through inner tube.
2. RC Button Bit (Rock-breaking & Sampling End )
Mounted on the front of RC hammer. Forged alloy steel bit body with tungsten carbide buttons. Distinguished from conventional DTH bit: it has central sample ports plus side flushing nozzles. Rock fragments broken by carbide buttons go through central sample passages into the inner tube of drill string for core sampling. Available in concave / flat face designs for hard rock exploration.
3. Dual-wall RC Drill Rod
Dual concentric pipe structure: outer pipe and inner tube.
- Annulus (between outer & inner pipe): conveying compressed air down to RC hammer
- Inner tube: transporting rock cuttings & samples back to surface High-strength alloy steel, precision threaded connections. Outer thread transfers torque; inner passage keeps samples clean and uncontaminated.
4. Crossover Sub / Adapter
Used to connect different sizes of dual-wall rods, or connect drill rig head with RC drill string. It separates incoming down-flow air and upward sample flow, maintaining independent dual air passages.
5. Sample Collector / Sample Splitter
Installed at surface side of RC drill string. Captures rock cuttings delivered by inner tube for geological logging and assay analysis.
6. Auxiliary Spare Parts
- Circlips / Retaining rings 卡簧:Lock RC bit onto RC hammer
- Seals & O-rings 密封圈:Seal air between inner and outer tube
- Wear bushes 耐磨衬套:Reduce internal friction inside hammer
- Check valves 单向阀:Prevent backflow of cuttings and water